Konica Minolta BIZHUB C3110 Service Manual page 9

Security Function Ver. 1.01 Oct. 2014
• To go from the CE password screen to another, enter the CE password and call the
Service Mode menu to the screen. Then, quit the Service Mode.
5. The Service Mode screen will appear.
NOTE
• If you leave the site with the Service Mode setting screen being displayed, unau-
thorized changes could occur for any set values. When you finish the setting of
Service Mode, or if you have to leave the site by necessity when the Service Mode
has been set, be sure to press the Stop/Reset key and log-out from the Service
Mode.
6. Accessing the Service Mode
A6DTS1E002DA
5