Konica Minolta BIZHUB C3110 Service Manual page 22

10. Firmware rewriting
7. Select the specific firmware data to be upgraded and press the Select key.
8. Select [EXCUTE] and press the Select key.
9. Select [EXCUTE] and press the Select key.
10. The firmware upgrading procedure starts.
NOTE
• NEVER turn OFF the power of the printer during firmware upgrading.
• NEVER disconnect the USB memory device from this machine during the firmware
upgrading procedure.
11. This machine is automatically restarted as soon as the firmware is upgraded correctly.
NOTE
• At the time of firmware rewriting, check that there is no trouble code displayed.
• At the time of firmware rewriting, contact Konica Minolta when any trouble
occurred.
12. Remove the USB memory device from this machine.
18
Security Function Ver. 1.01 Oct. 2014
A6DTS1E016DA
A6DTS1E017DA