Konica Minolta BIZHUB C3110 Service Manual page 17

Security Function Ver. 1.01 Oct. 2014
5. Enter an 8-digit CE password to be newly used and press the Select key.
6. Re-enter the 8-digit CE password to be newly used and press the Select key.
NOTE
• The machine does not accept any new password that contains only the same char-
acter, consists of less than 8 digits, or that is the same as the previous password.
• For the CE Password, set a value other than the default.
• NEVER forget the CE password. When forgetting the CE password, contact Konica
Minolta.
If the CE password is forgotten, replacement of the MFP board will initialize the
setting values and turn "OFF" the Enhanced Security mode. Be sure to have the
administrator set the Enhanced Security mode back to "ON" again.
NOTE
• If there is a mismatch in the CE Password between that typed first and that just
typed, the machine displays a message telling that the CE Password entered is
wrong. In this case, set the CE Password once again.
Characters and symbols to be used for the CE password
• Numeric characters: 0 to 9
• Alpha characters: upper and lower case letters
• Symbols: !, #, $, %, &, ', (, ), *, ,, -, ., /, :, ;, <, =, >, ?, @, [,\ , ], ^, _, `, {, |, }, ~, +,
SPACE
Selectable from among a total of 94 characters
* The symbol """ cannot be selected.
8. Service Mode functions
[A ]
A6DTS1E011DA
[A ]
A6DTS1E012DA
13