Changing The Usb Driver Settings (Usb Driver); Changing The External Memory Setting (Ext. Memory Mode); Adjusting The Volume (Master Gain); Changing How Grand Space Is Applied (3D Mode) - Roland HP-207 Owner's Manual

Various Settings
Changing the USB Driver Settings (USB
Driver)
Normally, you don't need to install a driver in order to connect
the HP207 to your computer. However, if some problem
occurs, or if the performance is poor, using the Roland
original driver may solve the problem.
Specify the USB driver you want to use, and then install the
driver.
Setting
Choose this if you want to use the standard
USB driver that was included with your
Generic
computer.
Normally, you should use this mode.
Choose this if you want to use a USB driver
Original
downloaded from the Roland website.
If you change this setting, turn on the power once again.
For details on downloading and installing the
Roland original driver, refer to the Roland website.
Roland website:
http://www.roland.com/
For details on connecting your computer via the USB
connector, refer to "Connecting a Computer" (p.
91)
This setting is remembered even when the power is
turned off.
Changing the External Memory Setting

(Ext. Memory Mode)

In some cases, when USB memory is connected to the external
memory connector, it may take longer for data to be loaded,
or data may fail to be loaded successfully. If this occurs, you
may be able to solve the problem by changing the external
memory setting.
Mode 1, Mode2
If you change this setting, turn on the power once again.
This setting is remembered even when the power is
turned off.
84
Explanation
Setting

Adjusting the Volume (Master Gain)

If you are playing the HP207 through a connected external
system, there may be cases in which the volume from your
external system is too low even when the HP207's volume is
turned to the maximum setting. In such cases, you can adjust
the master gain setting as follows.
Adjusting the master gain will also affect the volume of the
internal speakers and headphones.
The sound may distort if you increase the volume
NOTE
excessively.
-12–0–12 dB
Changing How Grand Space is
Applied (3D Mode)
This specifies how 3D Sound Control (p. 31) will be applied.
Setting
When the headphones are connected, the
depth effect is optimized for headphones,
Auto
and when no headphones are connected,
the optimal depth for speakers is applied.
The optimal depth for speakers is used,
regardless of whether or not headphones
are connected.
Grand Space is also applied to the sound
Speaker
output from the Output connectors, making
this convenient when you want to play
through speakers connected to the Output
connectors.
The optimal depth for headphones is used,
Headphones regardless of whether or not headphones
are connected.
Setting
Explanation