STRIKEMASTER Lithium 40V Owner's Manual page 8

GENERAL POWER AUGER SAFETY WARNINGS
W A R N I N G
READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS.
Save all warning and instructions for future reference.
WORK AREA SAFETY
• Keep work area clean and well lit.
• Do not operate Auger in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
• Keep children and bystanders away while operating an Auger.
ELECTRICAL SAFETY
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and
refrigerators.
• Do not expose Auger to rain or wet conditions.
• If operating an Auger or accessories in a damp location is unavoidable, use a residual current device (RCD)
protected supply.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use
an Auger while you are tired or under the influence of drugs, alcohol or medication.
• Use personal protective equipment. Always wear eye protection.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power
source, picking up or carrying the Auger.
• Remove hex wrench from Auger Spiral before turning the power tool on.
• Do not overreach. Keep proper footing and balance at all times.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are
connected and properly used.
AUGER USE AND CARE
• Do not force the Auger. Use the correct Auger for your application.
• Do not use the Auger if the switch does not turn it on and off
• Disconnect the Battery from the power source from the Auger before making any adjustments, changing
accessories, or storing Auger.
• Store idle Auger out of the reach of children and do not allow persons unfamiliar with the Auger or these
instructions to operate the Auger.
• Maintain Auger. Check for misalignment or binding of moving parts, breakage of parts and any other
condition that may affect the Auger's operation. If damaged, have the Auger repaired before use.
• Keep cutting tools sharp and clean.
• Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into
account the working conditions and the work to be performed.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specified by the manufacturer.
• Use Auger only with specifically designated Battery.
• When Battery is not in use, keep it away from other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a connection from one terminal to another
• Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
SERVICE
• Have your Auger serviced by a qualified repair person using only identical replacement parts
ICE AUGER SAFETY WARNINGS
• Wear ear protectors. Exposure to noise can cause hearing loss.
• Hold Auger by insulated gripping surfaces when performing an operation where the cutting tool may
contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the
tool "live" and shock the operator
07