STRIKEMASTER Lithium 40V Owner's Manual page 5

STRIKEMASTER
START
STRIKEMASTER LITHIUM 40v 5 AMP HOUR BATTERY
1.
Remove StrikeMaster Lithium 40v Battery from carton (Image 1).
2. Unpack Battery Charging base, slide Battery onto Battery Charging Base using the
channels on both sides as a guide. Press down until you hear it click in place.
Leave Battery on Battery Charging Base until fully charged (Image 2).
NOTE: Battery is not fully charged when first removed from box.
3. When Battery Charging Base indicator shows green, your Battery is
fully charged (Image 3).
Your StrikeMaster Lithium 40v Battery is ready for use.
BATTERY CARE AND MAINTENANCE
1.
Store Battery in a warm, dry location (35°F/ 2°C – 100°F/ 38°C).
2. IN SEASON
a. Keep Battery fully charged.
b. Store on a plugged in Battery Charging Base in a warm, dry location.
(35°F/ 2°C – 100°F/ 38°C).
3. OFF SEASON
a. Charge Battery to full.
b. Store Battery in a warm, dry location (35°F/ 2°C – 100°F/ 38°C), off of Battery Charging Base.
c. If Battery is stored for a period longer than 6 months, Battery should be recharged back to full
before use.
EXTREME COLD WEATHER OPERATION
The Lithium-Ion Battery can be used in temperatures down to (-20°C/ -4°F). If your Battery is not performing
correctly, put the Battery on the Powerhead, free spin auger out and above ice for 30 to 90 seconds depending
on how cold the unit is (the colder the unit, the more time to warm up). After this sequence the Battery will
warm up and begin operating normally.
NOTE: Always store Battery in a warm location.
LITHIUM 40v BATTERY QUICK
®
04
IMAGE 1
IMAGE 2
IMAGE 3