Strikemaster; Quick Start - STRIKEMASTER Lithium 40V Owner's Manual

STRIKEMASTER

CHARGING BASE QUICK START
1.
Remove Lithium 40v Battery Charging Base from carton (Image 1). Plug in.
2. Unpack Battery, slide Battery onto Battery Charging Base using the channels on both
sides as a guide. Press down until you hear it click in place. Leave Battery on Battery
Charging Base until fully charged (Image 2).
NOTE: Battery is not fully charged when first removed from box.
3. When Battery Charging Base indicator shows green, your Battery is
fully charged (Image 3).
Your StrikeMaster Lithium 40v Battery is ready for use.
Your StrikeMaster Lithium 40v Battery Charging Base has built in "Smart Charging
Technology". The chart below shows you the correct charging procedure/occurrences
that could be experienced while charging.
LITHIUM 40v BATTERY
®
03
IMAGE 1
IMAGE 2
IMAGE 3