Know Your Ice Auger; Battery Connector - STRIKEMASTER Lithium 40V Owner's Manual

KNOW YOUR ICE AUGER

The safe use of this product requires an understanding of the information on the product and in this owner's
manual as well as a knowledge of the project you are attempting. Before using this product, familiarize
yourself with all operating features and safety rules.
HANDLE
BATTERY
CONNECTOR
OPERATING LOCK
LEVER
HEX WRENCH
COLLAR BOLT
DIRECTION CONTROL SWITCH (FORWARD/REVERSE)
Your ice auger has a direction control switch (forward/reverse) for changing the direction of auger.
OPERATING LOCK LEVER
Setting this operating lock lever in the OFF position helps reduce the possibility of accidental starting
when not in use. When you want to use this auger, you must pull up on the operating lock lever (deadman's
switch) lock-out trigger first. Then, press down the POWER button. Keeping both engaged simultaneously.
LED WORKLIGHTS
The two LED worklights, located on the bottom of the two handles, illuminate when the operating lock
lever and POWER button are engaged. This provides extra light for increased visibility. LED lights remain
on for 30 seconds after switches are released.

BATTERY CONNECTOR

The battery connector is used to connect Powerhead with the Battery.
09
DIRECTION CONTROL
SWITCH (FORWARD/
REVERSE)
POWERHEAD
LED WORKLIGHTS
AUGER SPIRAL
40v 5AH BATTERY
40v BATTERY CHARGING
BASE