Approvals; Hazardous Area Label - Dräger Flame 5000 Technical Manual

Approvals

Approvals
ATEX
Certifi cate Number: FM07ATEX 0033
II 2 G Exd IIC
IECEx
Certifi cate Number: FME 07.0002
FM
Class I Div 1 Groups B, C, D, T4
Ambient: -60°C to +85°C
Class I Zone 1 AEx/Ex d IIC T4
Ambient: -60°C to +85°C
CE
GEC: EN55022 & 082
Electromagnetic Emissions:
Compatibility: Immunity:
Conducted Emissions:
Radiated Emissions:
ESD:
RF Field (Amplitude):
Transient:
Surge:
RF Field (Common Mode):
Response Time:
Operating Distance:

Hazardous Area Label

This label shows the certifi cation and conditions of the Dräger Flame Detector 5000.
TYPE:
SERIAL No:
Draeger Safety U.K. Limited, Blyth,
ENTRY:
,
Northumberland, NE24 4RJ U.K.
M25
Manufactured by: Micropack Engineering
M20
Aberdeen, Scotland, AB12 4RR
WARNING: DO NOT OPEN WHEN EXPLOSIVE ATMOSPHERE MAY BE PRESENT
26
FLAME 5000
YEAR:
½" NPT Single
AMBIENT: -60ºC +85ºC
¾" NPT Dual
EN61000-6-3:2001
EN50130-4:1995 +A1:1998 +A2:2003
EN55022:1998 Class/Level B
EN55022:1988 Class/Level B
EN61000-4-2:1995 ±6kV (Contact) ±8kV (Air)
EN61000-4-3:2002 +A1:2002 10V/m 100% & 80% modulation
EN61000-4-4:1995 +A1:2001 +A2:2002 ±1kV
EN61000-4-6:1995 +A1:2001 Line - Line , Line - Earth ±1kV
EN61000-4-6:1996 +A1:2001 10V rms 100% & 80% modulation
min. 4 seconds (upto 30 seconds max.)
2-44 m
1725 II 2 G Ex d IIC T4
3260
AMBIENT: -60ºC +85ºC
FM07ATEX 0033
IECEx FME 07.0002
Maximum Voltage: 30VDC
Maximum Current: 700mA
WARNING: REFER TO FLAME 5000 TECHNICAL MANUAL BEFORE INSTALLING OR MAINTAINING THIS UNIT
TYPE 4, IP66
Class I DIV 1 GROUPS B,C,D,T4
AMBIENT: -60ºC +85ºC
Class I Zone 1 AEx/Ex d IIC T4
AMBIENT: -60ºC +85ºC
SEAL CONDUIT WITHIN 18" OF ENCLOSURE ENTRANCE