Martin Atomic 3000 LED Service Manual page 12

Service manual
6. Turn the fixture.
7. Remove the two screws for the air filter (4).
8. Remove the three Torx20 screws (5) for the UI
front cover.
9. Remove the UI front cover (6).
10. Remove the five Torx10 screws (7).
11. Replace the main PCB.
12. Follow the procedure in reverse order.
NOTE! Be careful when you install the UI front
cover. You need to slide it underneath the quarter-
turn brackets.
Atomic 3000 LED - Revision A, 11-30-2017
Figure 21: Removing air filter
5
6
Figure 22: Removing UI front cover
7
7
Figure 23: Removing the main PCB
4
7
12 of 20