Feature Key Information - NEC DT820 User Manual

1.
(b) Feature Key Information
Feature Key Information displays the followings.
Key Description
- Name and Number
Line Key
information
Feature Key - Feature Name
- Speed Dial Name
One-Touch
Information
Speed Dial Key
- Number Information
Maximum 11 characters (including icon)
Note:
Maximum 13 characters (excluding icon)
(3) LCD (Note 1)
LCD (Liquid Crystal Display) provides DT Series
activity information plus data, time and Softkey
Operation.
The LCD on the ITY-8LDX-1 has a 28-character,
3-line capability.
28 APR MON 8:45AM
101
List Dir
(4) Programmable Keys
These keys can be programmed as Flexible Line
key/Programmable Feature Key by Web/PCPro.
(5) Exit
The user can exit from a screen mode by pressing
this key.
Maximum
digits to be
displayed
Refer to
note*
Refer to
note*
Refer to
note*
STA101

VMsg
(6) Softkeys
Any feature shown at the bottom of the LCD is
available. The appropriate feature key is displayed
on the screen according to the call handling
process.
(7) Scroll Key
This key is used to turn over the page of 8LD
display.
(8) Help
The user can press this key followed by a
programmable key to Check what Line or
Programmable Feature is programmed on the key.
(9) Recall
Press key to finish an outside call and hear the dial
tone. With Centrex trunks press the recall key to
hook flash the line.
(10) Feature
Used to activate any features as terminal setup
functions.
(11) Answer
When LED on this key is flashing, press key to
answer a waiting call.
(12) Mic
Press the key to Mute/Un-Mute the speaker and/or
handset.
10