NEC DT820 User Manual page 47

1.
[User Setting]
Incoming Call
1
Talk
2
Display
3
4 Change Password
Security
5
6
Usability
0 Setting Reset

2
STEP 4:
Select DTMF Tone.
Select an item by one of the following operations.
• Highlight an item by using
or OK.
2
• Press
[Talk]
1 RTP Alarm
2
DTMF Tone
Key Touch Tone
3
4 Hold Music
5 Prefix

1/1
Back OK
, and press
.
1/1
Back
OK
STEP 5:
Select
2
Select an item by one of the following operations.
• Highlight an item by using
or OK.
• Press
[DTMF Tone]
0
Automatic
1 Disable
2
Enable
,
Menu Items
Follow the system settings. If no setting is
0 Automatic made in the system, the default setting
(DTMF=ON) is applied.
1 Disable Follow the terminal settings (OFF).
2 Enable Follow the terminal settings (ON).
For the setting on the system, contact the System
TIP
Administrator.
TIP
Default setting is Automatic.
TIP
The enabled item is highlighted.
41
0 1
Automatic, Disable or
Enable (see the following table).
0 2
- , and press
Back
Description
, and press
or OK.
1/1
OK