Selectable Display Messaging - NEC DT820 User Manual

5. Press the Speaker key, or hang up.
To cancel Call Forward – Both Ring at a forwarding
station:
1. Pick up the handset or press the Speaker key.
2. Dial the Call Forward – Both Ring Service Code
(default: 745).
-OR-
Press the Call Forwarding Programmable
Function Key (Service Code 751:14).
3. Dial 0 (Cancel).
4. Press the Speaker key or hang up.

Selectable Display Messaging

To select a message:
1. Press the Speaker key.
2. Press the Text Message key (Service Code 751:18
+ 01~20).
IN MEETING UNTIL 08:48
List Dir
STA 12345678

VMsg
3. Use VOL UP or VOL DOWN keys to scroll through
the messages.
4. For messages 1~8 and 10, enter digits to append
the message, if needed.
You can append messages 1~8 and 10 with
Note:
digits (e.g. the time when you get back). You
enter the time in 24-hour format.
No. Message
1 IN MEETING UNTIL ##:##
2 MEETING ROOM - #######
3 COME BACK ##:##
4 PLEASE CALL ###########
5 BUSY CALL AFTER ##:##
6 OUT FOR LUNCH BACK ##:##
7 BUSINESS TRIP BACK ##:##
8 BUSINESS TRIP ##########
9 GONE FOR THE DAY
10 ON VACATION UNTIL ##:##
11~20 MESSAGE 11~20
5. Press Speaker to hang up.
Intercom calls to extensions with Selectable
Note:
Display Messaging set will receive a DND
signal and receive the display message on
their telephone's display instead of ringing the
display.
105
Change "#" to:
Time (when meeting is
done)
Room name or
extension
Time (when returning)
11 digits (Tel. No.)
Time (when returning)
Time (when returning)
Date (when returning)
10 digits (where
reached)
Date (when returning)