Setup With Feature Key - NEC DT750 User Manual

SETUP WITH FEATURE KEY

• MICROPHONE ON/OFF
STEP 1: LED on
Mic
in microphone.
STEP 2: Press soft key associated with the MIC Dis-
play or press
• CALL INDICATOR LAMP ON/OFF
You can choose to turn the call indicator lamp either on
or off during ringing.
STEP 1: Press
Feature
INDICATOR
7:26 AM
MIC DND
INDICATOR
7:26 AM
MIC DND
The call indicator lamp lights when used as Message
Note
Waiting Lamp, even when it is turned off by the above
operation
shows the status of the built-
and .
1
Feature
and . The LCD displays:
7
ON
MON 12 JUL 2010
>>>
OFF
MON 12 JUL 2010
>>>
• SELECT DIAL MODE
You can select one pattern from Normal, Dynamic Dial
Pad or Preset Dial to originate a call.
When only Dynamic Dial Pad is activated:
To Set/Reset Dynamic Dial Pad
STEP 1: Press
Feature
Direct Dial Pad
7:26 AM
MIC DND
Direct Dial Pad
7:26 AM
MIC DND
When this feature is ON, you may initiate a call by
immediately dialing the number and the station will go
TIP
hands-free off-hook automatically. For details, see
ORIGINATE A CALL USING SELECTIVE DIALING
(DYNAMIC DIAL PAD, PRESET
34
and . The LCD displays:
8
ON
MON 12 JUL 2010
>>>
OFF
MON 12 JUL 2010
>>>
DIAL).
TO