NEC DT820 User Manual page 55

1.
STEP 5:
Choose 1
Select an item by one of the following operations.
• Highlight an item by using
or OK.
1
• Press
[Screen Saver]
Screen Saver Mode
1
2
Wait Time

STEP 6:
Choose either
Select an item by one of the following operations.
• Highlight an item by using
or OK.
• Press 1
[Screen Saver]
Disable
1
2
Enable

Screen Saver Mode.
, and press
.
1/1
Back
OK
1 2
Disable or Enable.
, and press
or 2 , and press or OK.
1/1
Back
OK
Default setting is Disable (ITY-6D-1, ITY-8LDX-1).
, Default setting is Enable (ITY-8LCGX-1).
TIP
If 1 Disable is specified, an afterimage may occur on the
LCD if the terminal is used for an extended length of
time. Recommend using the 2 Enable (default) setting.
TIP
The enabled item is highlighted.
STEP 7:
The display returns to the Screen Saver
screen. When
Step 7 Select
Input Wait Time to launch the screen
saver (1-999 min) and press
[Wait Time]
Input wait time.
1-999(min)
BK
TIP
Default value is 120 min.
49
2
Enable is selected, on
2
Wait Time.
or OK.
1
120
Back
OK