Seagull Models CESSNA 188 AGWAGON Assembly Manual page 23

3) Attach the electric motor box to the
firewall suitable with the cross lines
drawn on the electric motor box and fire-
wall. Using M5x25mm to secure the mo-
tor box to the firewall. Please see pictures
below.
You follow the same pattern on page 18 to
drill hole mounted motor.
M5x25mm and washers.
4) Attach the motor to the front of the
electric motor box using four 4mm blind
nut, four M4x20mm hex head bolts to se-
cure the motor. Please see picture shown.
Then, use 5.5mm drill bit to enlarge the
holes on the electric motor box.
5.5mm
Blind nut.
4mm
M4x20mm
23