Settings Of Can Operator Panels (B 1100 Only) - HAKO Hakomatic B 1100 Service Booklet

7. Operator Panel Settings
(B 1100 only)
The Code A and B operator panels (pre-sweeper / side brush and Cleaning agent /
SWA) have to be correctly set - i.e. coded - on the Dip switch.
These operator panel are available only in the Hakomatic B1100 & B1100 PB 1230.
They are located under the right-hand operator panel of the machine.
Code A (Pre-sweeper/Side brush; A2 ): Code B (Cleaning agent / SWA; A10):
1: OFF 1: ON
2: OFF 2: OFF
Foil 51