9.2.3 ZAPI Controller
9.2.3 Explanations On Displayed Error Messages
1) WATCH-DOG
Test during rest state as well as during ride; internal self-test of hard- and software; replace controller
in case of fault alarm!
2) EEPROM PAR. KO
Error in the memory area containing values of the setting parameters. System switches off. If error
still persists after having switched key switch OFF and ON again, replace logic! If error disappears,
mind that the saved parameter values are deleted. (—> initial setting)
3) EEPROM CONF. KO
Error in the memory area containing the controller configuration data. If error still persists after having
switched key switch OFF and ON again, replace logic! If error disappears, mind that the saved
configuration is deleted. (—> initial setting)
Foil 67