Check And Set Machine Type - HAKO Hakomatic B 1100 Service Booklet

3.1 Check And Set
Machine Type
1. Make sure to have the correct machine type set. Use the Dip switch A on the
control electronics for setting (see foil 22)
2. For the B1100 machine, the bars no. 1, 2, 4 are to set in bottom and the bar no. 3 in
top position. This setting is a prerequisite for display of the cipher 4.
For the B1100 PB1230 machine, the bars no. 2, 3, 4 are to set in top and the bar 1
in bottom position. This setting is a prerequisite for display of the cipher 14.
For the B1050 machine, the bar no. 3 is to set in bottom and the bars 1, 2 and 4 in
top position. This setting is a prerequisite for display of the cipher 11.
For the B1050 TB 1230 machine, the bar no. 2 is to set in bottom and the bars
1, 3 and 4 in top position. This setting is a prerequisite for display of the cipher 13.
3. If other ciphers appear, modify combination at the Dip switch.
B 1100 1: OFF
2: OFF
3: ON
4: OFF
B 1100 1: OFF
PB1230 2: ON
3: ON
4: ON
B 1050 1: ON
PB / CB 2: ON
3: OFF
4: ON
B 1050 1: ON
PB 1230 2: OFF
3: ON
4: ON
Foil 23