Proper Use; Acceptance Of The Machine - HAKO -Citymaster 1800 TDI Instruction Manual

Congratulations !
You decided for the dependable and
comfortable Hako-Citymaster 1800
TDI. This vacuum sweeper was desi-
gned under particular consideration of
aspects of our environment for use on
roads, footpaths and in public areas.
Performance and service life of your
machine are a direct function of proper
operation, servicing and maintenance.
The instruction manual is located
behind the driver's seat.
Before first operation read these
instructions carefully. The manual will
inform you in detail about operation
of the machine and provides valuable
information about service and mainten-
ance with "Caution" and the symbol
as used in this manual identifies
items relevant to safety. Please make
sure to pass all safety instructions to
other operators.
Prior to first operation of this machine,
read the manual carefully and strictly
comply with the instructions contained.
Please also refer to the General
Safety Provisions (page 45).
The present Owner's Manual deals
with the Hako-Citymaster 1800 TDI and
in-cludes information about the optio-
nal handheld suction hose and extra
water pump. For more options, as for
example the oxidative catalyst, A/C
installation, high-pressure water jet
installation, please go by the separate
Owner's Manuals issued for these
items.

Proper use

This sweeper has been designed for
sweeping roads, parking grounds,
foot-paths and similar areas and for
collecting dry and moist residues nor-
mally found in such places under nor-
mal road and weather conditions.
Using the machine beyond this scope
of application will be deemed improper
use; the manufacturer cannot be held
liable for consequential damage; such
use would be at the owner's sole risk.
The machine must not be used for col-
lecting poisonous, flammable or other
substances harzardous to health.
The term of proper use also includes
operation, maintenance and repair
work to be performed in compliance
with the manufacturer's specifications.
The sweeper may be used, serviced
and repaired by personnel only that is
familiar with the machine and aware of
possible hazards involved.
Accident Prevention Regulations, and
all other aspects of safety and work-
ing medicine will have to be complied
with, this also includes pertinent road
traffic regulations.
If modifications to the machine are
made in absence of the manufacturer-
's prior consent, the latter cannot be
held liable for damage resulting from
such unauthorized modification.
Acceptance
of the machine
Upon receipt, check machine for pos-
sible damage in transit. For refund of
such damage have Deutsche Bahn
AG or your freight forwarder confirm
such damage; mail notification and
waybill to:
Hako-Werke GmbH
Hamburger Str. 209-239
D-23843 Bad Oldesloe
43