Advertisement
https://wiki.teltonika-gps.com/view/Template:FMT1_First_start_card
Template:FMT1 First start card
Special and small waterproof GNSS tracker with built-in accelerometer.
Contents
1 Know your device
2 Pinout
3 Set up your device
3.1 How to insert Micro-SIM card and connect the battery
Know your device
Pinout
PIN
PIN NAME
NUMBER
1
VCC
(10-30)V
DC (+)
2
GND (-)
Set up your device
How to insert Micro-SIM card and connect the battery
Unscrew 6 screws counterclockwise.
1.
2.
Remove the cover.
3.
Insert Micro-SIM card as shown with PIN request disabled or read
enter it later with
pointing forward to slot.
4.
Connect the battery as shown to device. Position the battery in place where it does not
DESCRIPTION
(Red)
Power supply
(+10-30 V DC)
(Black) Ground
Teltonika
Configurator. Make sure that Micro-SIM card cut-off corner is
Security info
how to
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Teltonika FMT1
Summary of Contents for Teltonika FMT1
- Page 1 Template:FMT1 First start card Special and small waterproof GNSS tracker with built-in accelerometer. Contents 1 Know your device 2 Pinout 3 Set up your device 3.1 How to insert Micro-SIM card and connect the battery Know your device Pinout...
- Page 2 obstruct other components. After configuration, see (Windows), attach device cover back and screw in all PC Connection screws. Device is ready to be mounted. Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.
Need help?
Do you have a question about the FMT1 and is the answer not in the manual?
Questions and answers