Agilent Technologies 1100 Series User Manual page 29

Figure 9
Control
Reset
Balance
Home
...
The Agilent 1100 Series Control Module
Control Module Software
Where to go from the System Screen - Menu Structure
Configure
LC System
Pump
Autosampler
Detectors
Col. Comp.
Auto-On
On Error
Printer Setup
Display Settings
User Settings
Interfaces
Column
Identific.
...
Status Screen
This screen shows the most important parameters of the system in an easy-to-read
style. Included parameters are flow, pressure, column temperature, absorbance units,
detector wavelength, elapsed time, etc. depending on the LC system configuration.
The screen content is updated in short intervals of roughly one second.
You can also monitor the LC system and module status using the Status bar at the
top of each screen. The content of the Status bar varies depending on the screen and
is very limited. The status for each module can also be displayed. In the respective
Setting screen press the m (menu) key. In the appearing context menu select Status.
System
Tests Records
Pressure Test System Log
Leak Test Error Log
Temperature EMF Data
Calibration Maintenance log
Change Arm Firmware
Wavelength Update
Calibr. Identify
DAC Test Print
... ...
On/
Off
Start
Plot
Views
Analysis
(Samples)
Setup
System
29