Safety Features; Maintenance, Metrological Verification; Warranty; Cleaning - AEMC MTX 3282B General Instructions Manual

General instructions (cont'd)

Safety features

Maintenance and
metrological
verification

Warranty

Unpacking -
repacking

Cleaning

4

It is impossible to access the battery or fuse compartment without first
disconnecting the measurement leads.

When measuring voltages greater than 60 V
flashes on the display.

Automatic detection of a connection on the "Ampere" terminal.

When there is a persistent range overrun, an intermittent buzzer indicates the
risk of electric shock.
Any access to the internal circuits for adjustment, servicing or repair of the unit
under power must be undertaken only by qualified personnel, after reading the
instructions in this MANUAL.
A qualified person is a person who is familiar with the installation, its
construction, its use and the hazards that exist. They are authorized to activate
and deactivate the installation and equipment, in compliance with the safety
instructions.
For all repairs under or outside of the warranty, return the device to your retailer.
This equipment is guaranteed for 3 years against any defect in materials or
workmanship, in accordance with the general terms and conditions of sale.
During this period, the equipment can only be repaired by the manufacturer. The
manufacturer reserves the right to carry out repair or replacement of all or part of
the equipment.
If the equipment is returned to the manufacturer, initial transport costs shall be
borne by the customer.
The warranty does not apply in the event of:
 unsuitable use of the equipment or use with other incompatible equipment
 modification of the equipment without explicit authorization from the
manufacturer's technical services
 repair carried out by a person not certified by the manufacturer
 adaptation to a specific application, not provided for in the definition of the
equipment or by the operating MANUAL
 an impact, a fall or flooding.
All the equipment was verified mechanically and electrically before shipping.
When you receive it, carry out a quick check to detect any damage that may
have occurred during transport. If necessary, contact our sales department
immediately and register any legal reservations with the carrier.
In the event of reshipping, it is preferable to use the original package. Indicate
the reasons for the return as clearly as possible in a note attached to the
equipment.
 Turn the instrument off.
 Clean it with a damp cloth and soap.
 Never use abrasive products or solvents.
 Allow to dry before any further use.
General instructions
or 30 V , the
DC AC
100,000-count Graphical Multimeters
symbol