Access To Main Functions - AEMC MTX 3282B General Instructions Manual

Graphical multimeters
Table of Contents

Advertisement

Functional description
Functional description (cont'd)

Access to main functions

Connection of leads
Functions authorized
when connected on
the V
terminal
Functions
authorized when
connected to the
A terminal
100,000-count Graphical Multimeters
The input terminals are limited to 3 : COM, V, ,
Connect the black lead to the COM socket (for all measurements).
Voltage measurement (Volt).
PEAK is displayed when a peak (Pk+ Pk-measurement) of voltage is detected
and when it is higher than the range of active voltage.
Measurement of Frequency (Hz) on a V
A 1st press gives access to Resistance measurements (Ohm).
A 2nd press gives access to Continuity measurements (
A 3rd press gives access to Diode measurements (
A 1st press gives access to Temperature measurements (according to the last
configuration of the function).
A 2nd press gives access to the type of temperature measurement: ° C, ° F, K.
Selection using the
Another press on this key while selecting the measurement type gives access
to the type of sensors:
- platinum probes: Pt100 or Pt1000 only on
- thermocouples: J or K (TC J, TC K)
Selection using the
Measurement of Capacitance.
"Favorite" measurement configurable by the user.
For the menu's configuration, see §.
Instrument Configuration menu.
When the red lead is connected to the A terminal, it automatically selects
Current (AC + DC) measurement.
If current measurement is selected without connection of a lead to terminal A
or without a protection fuse, the LEADS symbol flashes on the display.
Current measurement (Ampere)
The current measurement may be performed using autorange
(AUTO PEAK) over the whole scope of the ranges (µA, mA, A).
PEAK is displayed when a peak (Pk+ Pk- measurement) of current is detected
and when it is higher than the range of active current.
"Favorite" measurement configurable by the user.
For the menu's configuration, see §.
Instrument Configuration menu.
voltage.
AC
keys, validation using the
MTX 3282B, MTX 3283B
keys , validation using the
Function.
Function.
and A.
).
).
key or after 2 s.
key or after 2 s.
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mtx 3281bMtx 3283b

Table of Contents