Functional description
Functional description (cont'd)
Selection of
energy type
Recharging the
accumulators
100,000-count Graphical Multimeters
For correct management of the battery or accumulator charge status indicator,
the type of power must be selected:
Opening of the Configuration menu with the
Selection of the "General" function using the
Validation of General settings using the
Configuration
General
Measure
Func.
Func. MATH
General settings
Selection of Energy Type menu using the
General
IR baud
Config
Energy
Energy type
Modification of the Energy Type (battery or acc.) using the
Validation and exit from the successive menus using the
Before carrying out this operation, check that the accumulators are fitted in the
instrument ; they do not need to be removed from the multimeter to be
recharged.
Recharging is only possible if "Accumulator" has been selected in the Energy
Type menu (see above).
If you try to recharge the accumulators when the batteries are fitted in the
multimeter, it could damage it.
For safety reasons, the accumulators should only be loaded at between 0 and
40°C.
Caution
High internal temperature due to a current measurement may
trigger the thermal security mechanism.
9600
user
bat.
Accumulator
key.
keys.
key.
keys .
key.
key.
11