Table of Contents
Advertisement
Functional description (cont'd)
Initial settings
Choice of language
Setting the
date and time
Activation of the
buzzer (Beep)
Automatic
shutdown (sleep)
Display contrast
14
The general menu configures the parameters of the multimeter according to the
conditions of use and the user's preferences.
Opening of the Configuration menu with the
Selection of the General menu using the
General
Language
Date/Time
Beep
Sleep
Set language
Choix langue
Selection of the language for the multimeter's menus.
Two options are available: French (Fr) or English (En, default).
Date and time
08
: 03 : 2005
10 : 03 : 45
Validation (default), or not , of audio signal (beep) when:
- a key is pressed,
- there is a voltage of more than 60 V
- a stable measurement is acquired in AUTO HOLD mode,
- the power supply voltage (battery) is insufficient.
The audio signal is maintained even when the buzzer is deactivated :
during continuity testing,
when the range is exceeded (voltage or current),
on a 10 A measurement,
if the position of the leads and the function selected are incompatible.
Validation (default), or not, of automatic shutdown (sleep) after 30 min if there
has been no action on the multimeter's front panel during that time.
In SURV, MEM and Communication modes, automatic shutdown is not
validated.
For your safety, automatic shutdown is inhibited when the values measured
(voltage, current) on the inputs exceed the danger thresholds (indicator opposite
displayed).
Contrast
A long press on
General
En
Contrast
Back-light
on
Comm.
off
IR baud
Back-light auto-off
delay
Selection of the variables using the
Modification of the value using
Clock validation and start-up when menu is
closed using
or 30 V
DC
Modification of the value (default: 50 %)
key .
using the
Validation of setting using
directly opens the menu,
100,000-count Graphical Multimeters
Functional description
key.
keys and then the
key.
10 s
IR
9600
keys .
key.
on the "V" input,
AC
key.
validates the setting.
key.
Advertisement
Table of Contents
