Application - Min/Max Value Transducer; Channel Name - ABB i-bus KNX Product Manual

11.6.8

Application - Min/max value transducer

Up to eight input values can be compared with each other via the application.
The following communication objects are available:
"GFx: output"
■
"GFx: input x"
■
The objects "GFx: input x" and "GFx: output" can take on different sizes (1 byte - 4 byte,
depending on the object type selected).
The bit sizes of objects "GFx: input x" and "GFx: output" can be collectively adjusted for the
different applications.
The application can send either the largest input value, the smallest input value or the average
of all input values via the output object. The values are sent either at each input assignment or
when the output object is changed.
Note
The parameters for application "Min/max value transducer" can be called up via
general parameters .
Note
The number of the object (GF1 - GFx) depends on the channel used.
11.6.8.1

Channel name

Entry:
The parameter can be used to name the selected channel. The preset name "Channel" can be
replaced with any arbitrary name. The length of the name is limited to 30 characters.
Product manual 2CKA001473B9482
Description of application and parameters
<Name>
Application "General functions"
│169