Acoustic Feedback Signal Via Object; Activation Of The Acoustic Feedback Signal With - ABB i-bus KNX Product Manual

11.3.1.2

Acoustic feedback signal via object

Options:
Deactivated:
■
– The communication object is not enabled.
Activated:
■
– The communication object is enabled.
A 1-bit communication object "BUZ: object activation of acoustic feedback signal" can be
enabled with this parameter. The further differentiation is carried out via the parameter that is
available after enabling.
11.3.1.3

Activation of the acoustic feedback signal with

Options:
ON telegram:
■
– Activation via On telegram.
Off telegram:
■
– Activation via Off telegram.
The parameter is used to specify whether the acoustic feedback signal is activated via the input
object at the receipt of an On or an Off telegram.
Note
The parameter can only be set when parameter "Acoustic feedback signal via
object" or parameter "Acoustic alarm via object" is activated.
Product manual 2CKA001473B9482
Description of application and parameters
Deactivated
Activated
On telegram
Off telegram
Application "Device settings"
│52