Colour For Zone 5 (Corresponds To 100%) - ABB i-bus KNX Product Manual

11.5.138.12

Colour for Zone 5 (corresponds to 100%)

Options:
Off:
■
– The button LEDs are switched off.
Yellow - white:
■
– The button LEDs light up in the fixed colour at value telegrams for zone 5.
The parameter is used to specify the colour the RTC button LEDs light up in when a telegram
with value "100%" is received via the 1-byte communication object "Status LED". The default
setting is "red".
Note
The parameter can only be set if the "Operating mode" parameter and is set on
"Status illumination" and the "Object type for status object" parameter is set on
"1 byte 0-100%".
Product manual 2CKA001473B9482
Description of application and parameters
Off
Yellow
Red-orange
Red
Violet
Blue
Green
White
Application "Function block RTC"
│134