Object Type Output; Send Output Object - ABB i-bus KNX Product Manual

11.6.4.7

Object type output

Options:
1 bit:
■
– Object "GFx: output" consists of a 1-bit value (0/1).
1 byte:
■
– Object "GFx: output" consists of a 1-byte value (0 - 255).
Each logic function has an output object. The result determined from the inputs is sent on the
bus via the output object.
The parameter is used to specify the bit size for the output object.
11.6.4.8

Send output object

Options:
With each input telegram:
■
When a telegram is received via the input object, the communication object always
–
sends the value of the output object on the bus. This also happens if the value of the
output object has not changed.
With a change of the output object:
■
The communication object only sends a telegram when the value of the output object
–
has changed.
The parameter is used to specify whether a telegram is sent via communication object "GFx:
output" at each receipt of a telegram or only at a change of the output object.
Product manual 2CKA001473B9482
Description of application and parameters
1 bit
1 byte
With each input telegram
With a change of the output object
Application "General functions"
│150