Temperature Reading - Weighting Of External Measurement 2 (0 To 100%); Temperature Reading - Cyclic Sending Of The Actual Temperature (Min); Temperature Reading - Difference Of Value For Sending The Actual Temperature (X 0.1°C) - ABB i-bus KNX Product Manual

11.5.107 Temperature reading — Weighting of external measurement 2 (0 to 100%)
Options:
Specifying the weighting of the external measurement 2 from 0 to 100%. The setting together
with the weighting of the external measurement (0 - 100%) must result in 100%.
Note
This parameter is only available when the "Inputs of weighted temperature
reading" parameter is set on "2x external measurement" or "Internal and 2x
external measurement".
11.5.108 Temperature reading — Cyclic sending of the actual temperature (min)
Options:
The current actual temperature used by the device can be cyclically transmitted to the bus.
11.5.109 Temperature reading — Difference of value for sending the actual temperature (x 0.1°C)
Options:
If the change in temperature exceeds the parameterised difference between the measured
actual temperature and the previous actual temperature that was sent, the changed value will
be transmitted.
Note
This parameter is only available when the "Inputs of temperature reading"
parameter is set on "Internal measurement" or "Weighted measurement".
Product manual 2CKA001473B9482
Description of application and parameters
Setting option between 0 - 100
Setting option between 5 - 240
Setting option between 1 - 100
Application "Function block RTC"
│115