Application - Light Scene Actuator; Channel Name; Number Of Scenes - ABB i-bus KNX Product Manual

11.6.9

Application - Light scene actuator

The application is used to create up to eight scenes and eight actuator groups.
The following communication objects are available:
"GFx: scene call-up"
■
"GFx: actuator group x"
■
The input object "Scene call-up" has the size 1 byte. The output objects can take on different
sizes (1 bit - 4 byte, depending on the object type selected).
The application is used to call up scenes stored in the device. This takes place via the receipt of
the scene number on object "Scene call-up".
For triggering different actuators, the size of objects "GFx: actuator group x" can be set via
parameter "Object type actuator group".
The user has the option of saving the scenes. A corresponding save telegram must be received
for this.
Note
The parameters for the "Light scene actuator" application can be called up via
general parameters, configuration of actuator objects and configuration of
scene x .
Note
The number of the object (GF1 - GFx) depends on the channel used.
11.6.9.1

Channel name

Entry:
The parameter can be used to name the selected channel. The preset name "Channel" can be
replaced with any arbitrary name. The length of the name is limited to 30 characters.
11.6.9.2

Number of scenes

Options:
The parameter is used to configure up to eight scenes for the light scene actuator.
Product manual 2CKA001473B9482
Description of application and parameters
<Name>
Setting option from 1 to 8
Application "General functions"
│172