Initial start-up and basics
Assigning the remote control to a receiver
– In order to establish the fi rst-time connection hold
the remote control as close as possible to the de-
sired SpotChecker.
– Press key 1 of the remote control, hold it down and
press key 8 simultaneously for approx. 2 seconds.
The transmitter will be assigned to the receiver.
After this, the remote control is ready for operation.
Key assignment
You can assign program-specifi c function to the eight
keys of the radio remote control.
– Select Options in the menu Confi guration and
then click the tab Function keys.
– Select the program function you want in the re-
spective list box for the keys and activate the ap-
propriate tag.
– Confi rm the changes you have made with OK.
38
Issue 02, 03/2009
Remote control
SpotChecker