Defects/Errors And Exceptional Stresses; Further Information - GE SpotChecker Operating Manual

Safety information
Defects/ errors and exceptional stresses
If you have reason to believe that a safe operation of
your SpotChecker is no longer possible, you have to
disconnect the instrument and secure it against unin-
tentional reconnection.
A safe operation is e.g. no longer possible
❚
if the instrument shows visible damages,
❚
if the instrument no longer operates perfectly,
❚
after prolonged storage under adverse conditions
(e.g. exceptional temperatures and/or especially
high air humidity, or corrosive environmental condi-
tions),
❚
after being subjected to heavy stresses during
transportation.
SpotChecker

Further information

A
Attention:
Observe the documentation for the other equipment
connected to the SpotChecker, such as computer or
power supply unit. The documentation contains impor-
tant safety instructions and information about permit-
ted uses.
The SpotChecker software provides extensive online
help which is always available to you when working
with the system. In this operating manual you will fi nd
any additional information that you might require.
If you have any questions about the use of your test
equipment, please contact your nearest representative
of GE Sensing & Inspection Technologies.
If you install additional software on the computer, GE
Sensing & Inspection Technologies will not bear any
responsibility regarding the infl uence this may have on
SpotChecker operation. The existing software drivers
may be overwritten in such a case.
Issue 02, 03/2009
Introduction
9