GE Security CS575 Installer Manual page 194

Location
17.5 Event Log
17.6 X-10 Devices
17.7 Advanced Menu
17.8 Zone Status
17.9 Device/Location Programming
B.17.5
Term
A menu command that is used to view the event log. The event log is a list of
events that occur in the system, regardless of the armed state of the system.
They are held in a sequential event buffer with a time and date stamp. When
the log is full, it overwrites the oldest entries with new data. These events can
later be viewed through downloading.
A menu option that lists the X-10 devices that can be turned ON/OFF.
A menu option that activates certain options in the installer menu structure.
A menu entry that indicates the zone status.
A menu command that switches into backward compatible programming
mode. This mode uses devices, locations and segments.
In this mode:
The OK/Menu key is used instead of the * key.
The F2 key is used instead of the Exit key.
Please note that the recommended programming method is to use the menu
structure rather than devices and locations.
CS875-575-375-275-175 Installers Manual with CS5500 keypad
Definition