GE Security CS575 Installer Manual page 10

Power (green)
OK
Ready (green)
Fire (red)
Function keys
No
OK
A.1.2
• On if the system is connected to the mains and the battery is OK.
• Flashes if the system has no battery or a low battery.
• Off if the system is not connected to the mains.
• On when the system is ready to arm.
• Flashes when the system is ready to force arm.
• Off when the system cannot be armed.
• On when a fire zone has been activated.
• Flashes when there is a problem with a fire zone.
• Off when all fire zones are operating correctly.
• Press F1 to scroll to the start of the LCD message.
• Press F3 to scroll to the end of the LCD message.
In multi-area mode, these keys have specific functions. If you select one or more areas in this mode:
• Press F1 to part arm the set of areas.
• Press F2 to full arm the set of areas.
• Press F3 to disarm the set of areas.
You can program these keys to perform a function when not in multi-area mode.
Press No to:
• Cancel a change to the menu selection or
• Navigate to a higher level in the menu structure or
• Cancel a sequence when entering numeric data.
Press OK to:
• Activate the menu or
• Accept selection changes or
• Move forward in the menu structure or
• Complete a sequence when entering numeric data.
CS875-575-375-275-175 Installers Manual with CS5500 keypad