Align Transmitter Head - Emerson Rosemount 5408 Quick Start Manual

Quick Start Guide
4

Align transmitter head

1. Loosen the nut slightly and turn the transmitter.
2. Verify the transmitter head is properly aligned.
Option
Open tank Align the marking on the sensor module toward the tank wall (see
Still pipe
Chamber
3. Tighten the nut.
18
60 mm
Description
Align the external ground screw toward the holes of the still pipe (see
Figure 4-2).
Align the external ground screw toward the process connections (see
Figure 4-3).
Torque 355 in-lb (40 N-m)
60 mm
Rosemount 5408 and 5408:SIS Level Transmitters
March 2018
Figure 4-1).