Maintenance - Thermo Scientific GenPure Standard Operating Instructions Manual

13. Maintenance

Regular maintenance of your system maintains the value of it. We recommend that you close a
service contract with your service company. You then have the certainty of a high operational
safety and reliability.
NOTE!
To ensure that your system will work reliably for a long time, it must be checked, serviced and
cared for at regular time intervals in accordance with these Operating Instructions.
For this reason, the Operating Instructions must be readily available to operating and mainte-
nance staff at all times, and be carefully followed.
Any maintenance work should become necessary during the validity of the guarantee, this is
only to be carried out by a service professional which is expressly authorized to do such work.
The staff who are trained on and operate the system are committed to carry out daily/weekly
checks.
The maintenance work specified on the maintenance record supplied with these Operating In-
structions should to be carried out weekly.
CAUTION!
The cleaning and disinfection of your system is performed for reasons of hygiene and has no
effect on the technical condition of the system.
The system must only be cleaned and disinfected when algae or slime are detected inside it, or
at least once yearly.
Checks or maintenance work on electrical equipment are only to be made after turning
the system off at the mains switch to make it currentless and ensuring that it will not be
inadvertently turned back on. Such work is only to be carried out by qualified electri-
cians
50
Thermo Scientific Barnstead GenPure with xCAD
Ultrapure water system