Thermo Scientific GenPure Standard Operating Instructions Manual page 15

Conductivity, feedwater
Conductivity, after UV-photooxidation
Conductivity, ultra pure water
Feedwater
Rinse water
Ultra pure water/outlet
Ultra pure water/recirculation
Ultra pure water/inlet
Ultra pure water/recirculation
Ultra pure water/outlet
Sterile filter outlet
Electrical connections / external switched mode power supply
Input voltage
Output voltage
System connection
Serial interface
Protection Class
2x SUB-D socket
Sound-pressure level
Ambient conditions (
Usage
Height
Temperature range
Relative humidity
Line-voltage variation
Transient overvoltages
Ventilation requirements
Degree of pollution
Thermo Scientific Barnstead GenPure with xCAD
Cell constants, measuring cells
-1
0.16 cm
-1
0.01 cm
-1
0.01 cm
Connectors for water genpure
Hose, 8 mm o.d.
Hose, 8 mm o.d.
Hose, 6 mm o.d.
Hose, 4 mm o.d.
Connectors for water, xCAD
Hose, 6 mm o.d.
Hose, 4 mm o.d.
R 1/4"
Hose, 8 - 10 mm o.d.
AC 100 – 240 V, 50 – 60 Hz, 5 – 3.8 A
DC 24 V, 3,8 A
DC 24 V, 80 W
RS 232
Class II (external SMPS certified as Class I)
Electrical connections, xCAD
25 pin
Airborne sound emission
49 db(A)
DIN EN 61010-1 (VDE 0411-1):2011-02)
Indoor rooms
Up to 2000 m
From 5° C to 40° C
Maximum relative humidity 80 % at temperatures of
up to 31° C, linearly decreasing to 50 % relative hu-
midity at 40° C
Not more than
As usually occur in the supply network (overvoltage
category II acc. to IEC 60364-4-443).
Note: The rated level of transient overvoltage is the
withstand impulse voltage acc. to overvoltage cate-
gory II of IEC 60364-4-443
There are no special requirements with regard to ven-
tilation.
2
Ultrapure water system
±
10 % of the line voltage
15