Epson WF-C20590 Series User Manual page 68

User's Guide
Registering a Polling Send/Bulletin Board Box
1. Tap Fax Box on the home screen, and then tap Polling Send/Board.
2. Tap the Polling Send box or one of the boxes named Unregistered Bulletin Board.
3. If a password entry screen is displayed, enter the password.
4. If you are registering a bulletin board, Do all of the following:
❏ Tap Name (Required), enter the name, and then tap OK
❏ Tap Subaddress(SEP), enter the subaddress, and then tap OK
❏ Tap Password(PWD), enter the password, and then tap OK
5. Tap the boxes shown below such as Notify Send Result and make the appropriate settings as necessary.
Note:
If you set a password in Box Open Password, you will be asked to enter the password the next time you open the box.
6. Tap OK.
To change or delete, tap Fax Box on the home screen, and then tap Polling Send/Bulletin Board Box. Next, tap
the box you want to change or delete, and the Job/Status, and then follow the on-screen instructions.
Storing a Document in the Polling Send/Bulletin Board Box
1. Tap Fax Box on the home screen, and then tap Polling Send/Board.
2. Tap the Polling Send box or one of the bulletin board boxes that have already been registered.
If the password entry screen is displayed, enter the password to open the box.
3. Tap Add Document.
4. On the fax top screen that is displayed, check the fax settings, and then tap
To check the document you stored, tap Check Document. On the screen that is displayed, you can view, print or
delete the scanned document.
Related Information
"Sending Faxes Using the Control Panel" on page 61
&
"Placing Originals" on page 32
&
"More" on page 102
&
"Checking Fax Jobs" on page 98
&
Storing a Fax Without Specifying a Recipient (Store Fax Data)
You can store up to 100 pages of a single document in monochrome. This allows you to save the time spent
scanning the document when you need to send the same document frequently.
1. Tap Fax on the home screen.
Faxing
68
x
to scan and store the document.