Epson WF-C20590 Series User Manual page 209

User's Guide
Code Problem
104 Reverse printing has failed due to a lack of available
memory.
106 Cannot print from the computer due to the access
control settings.
107 User authentication failed. The job has been
canceled.
108 Confidential job data was deleted when the printer
was turned off.
109 The received fax was already deleted.
110 The job was printed on one side only because the
paper loaded does not support double sided
printing.
111 Available memory is running low.
120 Cannot communicate with the server that is
connected using an open platform.
130 Collated printing has failed due to a lack of available
memory.
131 Reverse printing has failed due to a lack of available
memory.
Solving Problems
Solution
If you want to print in reverse, try the following
methods to reduce the size of the print job.
❏ Lower the print quality and the resolution.
❏ Change the format setting.
❏ Reduce the number of images, letters or fonts
used in the print job.
Contact your printer administrator.
❏ Make sure that the user name and password are
correct.
❏ Tap Settings > General Settings > System
Administration > Security Settings > Access
Control. Enable the user restriction function, and
then allow the job without an authentication
information.
-
-
If you want to perform 2-sided printing, load paper
that supports 2-sided printing.
Try the methods below to reduce the size of the print
job.
❏ Lower the print quality and the resolution.
❏ Change the format setting.
❏ Reduce the number of images, letters or fonts
used in the print job.
Make sure there are no errors on the server or the
network.
Try the methods below to reduce the size of the print
job. If you do not want to use these methods, try
printing one copy at a time.
❏ Lower the print quality and the resolution.
❏ Change the format setting.
❏ Reduce the number of images, letters or fonts
used in the print job.
If you want to print in reverse, try the following
methods to reduce the size of the print job.
❏ Lower the print quality and the resolution.
❏ Change the format setting.
❏ Reduce the number of images, letters or fonts
used in the print job.
209