Guest Check Move; Shift Change; Hold Buffers - Vectron POS Modular User Manual

36
Proceed as described above but before pressing the key <GC split>
or enter the number of the GC to which the PLUs are to be trans-
ferred. Close with <GC> key or
9.2.5

Guest check move

Rather than splitting single PLUs from one check to another, "Check
Move" allows the entire check to be moved to another guest check.
The operators must be vested with the according authorization. Pro-
ceed as follows:
1. Open the G.C. to be moved. If the G.C. has already been opened,
close it with <G.C.> or
key or . G.C. moves can only be carried out if the G.C. is opened
anew.
2. Enter the target guest check number and close with <GC move>
key or . The guest check that has been moved is automatically
closed.
9.2.6

Shift change

Shift change means that a guest check is transferred to another ope-
rator (e.g. change of shift). Open the guest check that is to be trans-
ferred. Enter the number of the operator to whom the guest check is
to be transferred and press <Shift change> or
9.2.7

Hold buffers

To open a hold buffer press the respective key. By means of the hold
buffer keys you can switch between the individual hold buffers. To
close a hold buffer press a media key.
Depending on the programming of the POS system a hold buffer is
automatically assigned to a certain operator. In this case the hold
buffer change is automatically carried out if a new operator signs in.
Vectron POS Modular
.
and open it again via GC no. and <GC>
.