Guest Check Move; Shift Change; Hold-Buffers - Vectron POS ColorTouch User Manual

7.2.5 Guest check move

Rather than splitting single PLUs from one check to another, "Check
Move" allows the entire check to be moved to another guest check.
The clerks must be vested with the according authorization.
• Open the G.C. to be moved. If the G.C. has already been opened,
close it with <G.C.> and re-open it. G.C. moves can only be carried
out if the G.C. is opened anew.
• Enter the destination check number and depress <Check Move>.
The guest check that has been moved is automatically closed.

7.2.6 Shift change

Shift change means that a guest check is transferred to another clerk
(e.g. change of shift). Open the guest check that is to be transferred.
Enter the number of the clerk to whom the guest check is to be
transferred and depress <Shift change>.

7.2.7 Hold-buffers

To open a hold buffer press the respective key. By means of the hold
buffer keys you can switch between the individual hold buffers. To
close a hold buffer depress a media key.
Depending on the programming of the cash register a hold buffer is
automatically assigned to a certain clerk. In this case the hold buffer
change is automatically carried out if a new clerk is logged-in.
Vectron POS ColorTouch 19