Close And Re-Open A Gc; Paying A Guest Check; Guest Check Split - Vectron POS Modular User Manual

Vectron POS Modular
9.2.2

Close and re-open a GC

By pressing the <GC> key or
on the programming, the order is now printed on different printers,
e.g. at the counter or in the kitchen. The POS system is now open for
other orders.
If you want to open the GC again, e.g. to enter additional orders, you
only have to open the GC again (see again).
9.2.3

Paying a guest check

To finalize a GC, open it again (see above). The balance is displayed.
If you now press <Cash> or
printed and all PLUs are deleted from the GC. Before pressing the
<Cash> key or
mer and the change is displayed.
Depending on the programming of your POS system, there are seve-
ral other possibilities. For instance you can first print a subtotal
invoice and then print the total invoice after the guest decided on
the mode of payment.
9.2.4

Guest check split

It may often be necessary to split the guest check, if for instance
one guest wants to leave earlier than the others. For these cases you
have the function "G.C. Split". This function is only available for ope-
rators who have been vested with the according authorization.
To split a G.C., it must be opened again. If necessary close the GC
and open it again. Press the <GC split> key or
be split via the direct PLU keys or via PLU numbers. Having selected
all PLUs close with <Cash> or
is printed.
It may also happen that a guest changes the table. You can then split
PLUs from one GC to another.
the guest check is closed. Depending
or any other media key, the invoice is
you can enter the amount you got from the custo-
or another media key. The invoice
35
. Select the PLUs to
Modular
US