Operation; Sign In And -Out At The Pos System; Sign In With Key - Vectron POS Modular User Manual

Vectron POS Modular
9

Operation

This chapter gives an overview on the functions of your Vectron POS
Modular and an introduction into the basic operating procedures.
Your Vectron dealer has programmed your POS system to meet your
requirements. Some of your operating procedures may therefore dif-
fer from those described in this manual. Please ask your Vectron dea-
ler who will be glad to explain the functions installed for you .
The buttons on the touch screen display their func-
tions mainly by small pictographs, so-called icons. The
icons contained in the Vectron POS software and their
meaning are explained in the supplement.
Note
9.1

Sign in and -out at the POS system

Before you can make any entries the operator has to sign in at the
POS system. This allows you to trace at any moment which operator
is responsible for which entries. Different operators can get different
authorizations, e.g. void.
There are different ways to sign in and -out at the Vectron POS Mo-
dular.
9.1.1

Sign in with key

You sign in to the Vectron POS system by holding the key to the lock.
If an additional secret number has been programmed, enter this
number and confirm with <Enter>.
33
Modular
US