External Operator Locks - Vectron POS Modular User Manual

48 Vectron POS Modular

11.1.2 External operator locks

You can connect external operator locks type Addimat and Dallas
iButton Magnet to the Vectron POS Modular with the respective
expansion license. This is only useful if the POS Modular is not posi-
tioned within reach of the point of sale but e.g. is mounted below the
counter. In this case you could hardly use an internal operator lock.
External operator locks serve the same purpose as internal locks,
thanks to a two-metre-long cable you can easily position them, e.g.
at the monitor.
Order no. for external operator lock Dallas iButton Magnet: 20050101
Fig. 3: External operator lock Dallas iButton Magnet