Testing The Es Device - Brainboxes ES-357 Product Manual

8. Testing the ES device

In order to prove that your Brainboxes Ethernet to Serial device is functioning correctly, you can
perform a loopback test to check the Transmit and Receive lines are working and that you can access
the device over the network.
Perform a loopback: A loopback test will verify that your ES device is able to Transmit and
Receive Data. The Transmit and Receive lines will need to be connected so that any data
sent out of the ES device is then received back on the same Port. Please see the following
FAQ from our website for instructions on how to test your Serial port.
http://www.Brainboxes.com/faq/items/how-do-i-test-my-Brainboxes-card-to-make-sure-its-
working
If you are still experiencing problems, see the Troubleshooting Section in this manual.
ES Range Product Manual
Version 2.9
© Copyright Brainboxes Limited 2013
Page 31 of 66