Table of Contents
Advertisement
1.7.1. Device Info
Each Bluetooth device in the world must have a unique address. Some Bluetooth devices need to know the address of the
device they are connecting to. This address is also identified on the label attached to your product.
The firmware loaded onto your connected device is also displayed here. This is provided mainly for technical support
purposes, but also allows you to check for available or suitable updates.
1.7.2. Support/Links
Manual for BL-819, BL-830, BL-875
V6.1
The application will now load. There may be a short delay whilst
the device is detected and its current configuration is queried and
the appropriate fields are populated.
As a rule, sections on the left-hand side of the application display
information about your device. Settings cannot be changed here.
Sections on the right-hand side are where settings can be changed
as well as viewed.
Useful "tips" are displayed if the cursor is "hovered" over various
fields to help explain those options.
Each section can be expanded to see or change the relevant
settings for your RS-232 Bluetooth Adapter
All the settings are described in full detail below.
The Device Info section displays the Bluetooth address, name and firmware of the
product currently attached.
The local device name field displays the "friendly" name of the device that is
connected. This can be changed to any name as required as detailed further below.
The Support/Links section can be used to get more help from Brainboxes should you
be experiencing any difficulties.
The Brainboxes Bluetooth Support website and support email address are available
in this section.
© Copyright Brainboxes Ltd
Page 7 of 40
Advertisement
Table of Contents
