Windows Installation: Device Driver (Shown In Windows 8) - Brainboxes ES-357 Product Manual

Windows Installation: Device Driver (Windows 8)
Double click the icon labelled "Boost.LAN Manager" on the desktop to open the application.
10. Click on the "File > Find Devices" in the top left hand side of the window. This will find any
Brainboxes Ethernet to Serial devices connected to your network.
You can find your Brainboxes ES-device by selecting a device and matching it with the
corresponding MAC address available in the left hand panel (see below). The MAC
address of your device is located on a sticker on the side of the ES device.
11. Once found, select the device and scroll to the "Tasks" section on the left hand panel.
Now click Install Device as shown below.
The device will now begin to install. During the device installation you will see a timer
symbol and the status of the device will be 'Installing driver...'
12. In Boost.LAN Manger, the device will display a blue tick symbol showing that it is installed
and the status of the device will be 'Ready'. Shown below.
13. You can check the COM Number of the Port, by following the instructions in Section 7
Finding your Brainboxes COM port If you need to change the COM port number, see
Section 9 Changing Your COM Label)
ES Range Product Manual
Version 2.9
© Copyright Brainboxes Limited 2013
Page 17 of 66