Brainboxes ES-357 Product Manual page 13

5. Click "Install Device".
6. During the device installation you will see a timer symbol and the status of the device will
be 'Installing driver...'.
7. Once the device is installed a pop up box will appear saying 'Your new hardware is
installed and ready to use.'
8. In Boost.LAN Manger, the device will display a blue tick symbol showing that it is installed
and the status of the device will be 'Ready'.
9. You can check the COM Number of the Port, by following the instructions in Section 7
Finding your Brainboxes COM port If you need to change the COM port number, see
Section 9 Changing Your COM Label)
ES Range Product Manual
Version 2.9
© Copyright Brainboxes Limited 2013
Page 13 of 66